| PEARL: Advanced Rooftop Controller

The Pelican PEARL

| 3-Wire connection to thermostat.

The PEARL communicates with its Pelican thermostat over 3-wires. This allows you to easily install the PEARL even in limited wire applications.

The Pelican PEARL

| PEARL: Advanced Rooftop Controller

| 3-Wire connection to thermostat.

The PEARL communicates with its Pelican thermostat over 3-wires. This allows you to easily install the PEARL even in limited wire applications.

Make your heating, air conditioning, and ventilation
even smarter.

Economizer & Ventilation Logic.

The Pelican PEARL communicates with your Pelican thermostat to increase efficiencies through better use of the outdoors.

Modulate† equipment functions.

Varies the output of your equipment to match the needs of the indoor space.

Web-connected so you are always in control.

View real-time and historical data on how your equipment is operating. 

†This adds advanced logic to existing modulating mechanical HVAC equipment.

Make your heating, air conditioning, and ventilation
even smarter.

Economizer & Ventilation Logic.

The Pelican PEARL communicates with your Pelican thermostat to increase efficiencies through better use of the outdoors.

Modulate† equipment functions.

Varies the output of your equipment to match the needs of the indoor space.

Web-connected so you are always in control.

View real-time and historical data on how your equipment is operating. 

†This adds advanced logic to existing modulating mechanical HVAC equipment.

Ventilation management.

Schedule ventilation periods to maintain proper indoor air quality for your tenants when they are present and make sure you are saving energy while they are away. Add a Pelican carbon dioxide (CO2) sensor thermostat and the PEARL automatically adjust ventilation rates based on how occupied the room is, to help save on energy.

Economizer logic.

Modern buildings utilize technology to enhance energy efficiency values. The PEARL economically uses free cold outdoor air to condition your facility. And provides advanced fault detection and diagnostics notifications to prevent the miss use of the outdoors.

Varaible Speed Fan.

Set the correct speed for your supply and exhaust fans to run at during different heating, cooling, and ventilation cycles.

Modulate Heating and Cooling

The PEARL can modulate heating and cooling points to automatically maintain a supply temperature output that matches the room's demand.

Economizer logic.

Modern buildings utilize technology to enhance energy efficiency values. The PEARL economically uses free cold outdoor air to condition your facility. And provides advanced fault detection and diagnostics notifications to prevent the miss use of the outdoors.

Ventilation management.

Schedule ventilation periods to maintain proper indoor air quality for your tenants when they are present and make sure you are saving energy while they are away. Add a Pelican carbon dioxide (CO2) sensor thermostat and the PEARL automatically adjust ventilation rates based on how occupied the room is, to help save on energy.

Varaible Speed Fan.

Set the correct speed for your supply and exhaust fans to run at during different heating, cooling, and ventilation cycles.

Modulate Heating and Cooling

The PEARL can modulate heating and cooling points to automatically maintain a supply temperature output that matches the room's demand.

Preventive equipment alerts
delivered right to you.

Damper stuck open

Prevent accidently pulling in outdoor air when it is too hot or cold outside.

Damper stuck closed.

Don't miss out on free cooling or ventilating your indoor spaces.

Supply temperature out-of-range.

Identify that your equipment is not putting out the correct temperatures.

Equipment failure.

Recieve a notification if your equipment is not functioning correctly.

Preventive equipment alerts
delivered right to you.

Damper stuck open

Prevent accidently pulling in outdoor air when it is too hot or cold outside.

Damper stuck closed.

Don't miss out on free cooling or ventilating your indoor spaces.

Supply temperature out-of-range.

Identify that your equipment is not putting out the correct temperatures.

Equipment failure.

Recieve a notification if your equipment is not functioning correctly.

| Web-App enabled control.

Right from the Pelican App you can manage all aspects of the Pelican PEARL: schedules ventilation periods, set Economizer parameters and ventilation rates, and more. Plus the PEARL auto-pushes climate data and provides advanced equipment failure warning notifications.

| Web-App enabled control.

Right from the Pelican App you can manage all aspects of the Pelican PEARL: schedules ventilation periods, set Economizer parameters and ventilation rates, and more. Plus the PEARL auto-pushes climate data and provides advanced equipment failure warning notifications.

| Web-App enabled control.

Right from the Pelican App you can manage all aspects of the Pelican PEARL: schedules ventilation periods, set Economizer parameters and ventilation rates, and more. Plus the PEARL auto-pushes climate data and provides advanced equipment failure warning notifications.

| PEARL Inputs and Outputs

MODULATING OUTPUTS

(A1, A2) 0 - 10 VDC Signals

Two modulating outputs that are most commonly used for outside damper, variable speed fan, and/or modulating temperature control.

ENABLE OUTPUT

(E) Terminal

During an economizer or demand ventilation cycle, this outputs 24 VAC to turn on exhaust fans or open dampers.​

ANALOG INPUT

(S1, S2) 0 - 10 VDC Signal

When used as an outside air damper controller, the PEARL accepts a feedback signal to confirm the outside damper is in the correct position.​

EXTERNAL INPUTS

(T1, T2, T3) 10K Type II or Dry-Contact

Pull in up to three external temperatures. Most commonly an HVAC unit's discharge, return, and/or outside air temperatures. Or connect a dry-contact into the PEARL to incorporate a third-party occupancy sensor or equipment alarm.

CONNECTION TO THERMOSTAT

(R, C, D) 3-Wires Only

The PEARL and its Pelican thermostat communicate over a three wire connection.
R: 24 VAC, C: Common, D: Data.

DIGITAL OUTPUT

(Y, Y2, W, W2, G) HVAC Unit Control

Remove the wiring module from of your Pelican thermostat and mount it into the PEARL. The PEARL will enable your HVAC equipment's heating, cooling, and fan stages.

| PEARL Inputs and Outputs

MODULATING OUTPUTS

(A1, A2) 0 - 10 VDC Signals

Two modulating outputs that are most commonly used for outside damper, variable speed fan, and/or modulating temperature control.

ENABLE OUTPUT

(E) Terminal

During an economizer or demand ventilation cycle, this outputs 24 VAC to turn on exhaust fans or open dampers.​

ANALOG INPUT

(S1, S2) 0 - 10 VDC Signal

When used as an outside air damper controller, the PEARL accepts a feedback signal to confirm the outside damper is in the correct position.​

EXTERNAL TEMPERATURE INPUTS

(T1, T2, T3) 10K Type II or Dry-Contact

Pull in up to three external temperatures. Most commonly an HVAC unit's discharge, return, and/or outside air temperatures. Or connect a dry-contact into the PEARL to incorporate a third-party occupancy sensor or equipment alarm.

CONNECTION TO THERMOSTAT

(R, C, D) 3-Wires Only

The PEARL and its Pelican thermostat communicate over a three wire connection.
R: 24 VAC, C: Common, D: Data.

DIGITAL OUTPUT

(Y, Y2, W, W2, G) HVAC Unit Control

Remove the wiring module out of your Pelican thermostat and mount it into the PEARL. The PEARL will enable your HVAC equipment's heating, cooling, and fan stages.

| PEARL Inputs and Outputs

MODULATING OUTPUTS

(A1, A2) 0 - 10 VDC Signals

Two modulating outputs that are most commonly used for outside damper, variable speed fan, and/or modulating temperature control.

ENABLE OUTPUT

(E) Terminal

During an economizer or demand ventilation cycle, this outputs 24 VAC to turn on exhaust fans or open dampers.

ANALOG INPUT

(S1, S2) 0 - 10 VDC Signal

When used as an outside air damper controller, the PEARL accepts a feedback signal to confirm the outside damper is in the correct position.​

EXTERNAL TEMPERATURE INPUTS

(T1, T2, T3) 10K Type II or Dry-Contact

Pull in up to three external temperatures. Most commonly an HVAC unit's discharge, return, and/or outside air temperatures. Or connect a dry-contact into the PEARL to incorporate a third-party occupancy sensor or equipment alarm.

CONNECTION TO THERMOSTAT

(R, C, D) 3-Wires Only

The PEARL and its Pelican thermostat communicate over a three wire connection.
R: 24 VAC, C: Common, D: Data.

DIGITAL OUTPUTS

(Y, Y2, W, W2, G) HVAC Unit Control

Remove the wiring module out of your Pelican thermostat and mount it into the PEARL. The PEARL will enable your HVAC equipment's heating, cooling, and fan stages.

| Technical Specifications

COMPATIBILITY

Compatible with both the Pelican TC and TS series thermostats.

DIMENSIONS

in: 3.6 X 5.2 X 1.1
mm: 91.4 X 142 X 28

MOUNTING

Designed to be mounted inside the HVAC equipment it is controlling.

POWER

24 VAC, 60 Hz, 50mA

OPERATING VOLTAGE RANGE

23 - 30 VAC

RELAY CURRENT RATING

2.0A running (E)

Reference TC or TS Series thermostat technical specification for information on Limited Wiring Module relay ratings.

CODE COMPLIANCY

Meets California Title 24 Code.
Follows ASHREA Economizer and Ventilation standards.

OPERATING RANGE

-4°F to 122°F
5% to 90 % Relative Humidity (non-condensing)

STORAGE

-20°F to 160°F

OUTPUTS

A1: 0-10; VDC; adjustable range.
A2: 0-10VDC; adjustable range
E: 24 VAC (Enables during economizer and demand ventilation cycles).

INPUTS

S1: 0-10 VDC feedback; for outside damper fault detection.
S2: 0-10VDC feedback; for future use.
T1: 10K Type II Temperature Sensor Input or Dry-Contact Input
T2: 10K Type II Temperature Sensor Input or Dry-Contact Input
T3: 10K Type II Temperature Sensor Input or Dry-Contact Input

ADD TA1

A single Pelican thermostat, TC or TS Series, can accept a PEARL and a TA1.

SYSTEM PROTECTIONS

Mixed air low limit safety.
Free cooling enable/available indication.
Economizer enabled indication.
Compressor enabled indication.
Heating enabled indication.
Temperature sensor readings.
Minimum outside damper setting.
Maximum outside damper setting.
Outside Compressor Lock-Out
Temper Low Ambient Air

ALERTS AND NOTIFICATIONS

Air temperature sensor failure/fault.
Not economizing when it should.
Economizing when it should not.
Damper not modulating.
Excess outdoor air.
Supply temperature out of range.
Dry-Contact input to notification.

| Technical Specifications

COMPATIBILITY

Compatible with both the Pelican TC and TS series thermostats.

MOUNTING

Designed to be mounted inside the HVAC equipment it is controlling.

DIMENSIONS

in: 3.6 X 5.2 X 1.1
mm: 91.4 X 142 X 28

POWER

24 VAC, 60 Hz, 105mA

OPERATING VOLTAGE RANGE

23 - 30 VAC

RELAY CURRENT RATING

2.0A running (E)

Reference TC or TS Series thermostat technical specification for information on Limited Wiring Module relay ratings.

CODE COMPLIANCY

Meets California Title 24 Code.
Follows ASHREA Economizer and Ventilation standards.

OPERATING RANGE

-4°F to 122°F
5% to 90 % Relative Humidity (non-condensing)

STORAGE

-20°F to 160°F

OUTPUTS

A1: 0-10; VDC; adjustable range.
A2: 0-10VDC; adjustable range
E: 24 VAC (Enables during economizer and demand ventilation cycles).

INPUTS

S1: 0-10 VDC feedback; for outside damper fault detection.
S2: 0-10VDC feedback; for future use.
T1: 10K Type II Temperature Sensor Input or Dry-Contact Input
T2: 10K Type II Temperature Sensor Input or Dry-Contact Input
T3: 10K Type II Temperature Sensor Input or Dry-Contact Input

ADD TA1

A single Pelican thermostat, TC or TS Series, can accept (1) PEARL and (1) TA1.

SYSTEM PROTECTIONS

Mixed air low limit safety.
Free cooling enable/available indication.
Economizer enabled indication.
Compressor enabled indication.
Heating enabled indication.
Temperature sensor readings.
Minimum outside damper setting.
Maximum outside damper setting.
Outside Compressor Lock-Out
Temper Low Ambient Air

ALERTS AND NOTIFICATIONS

Air temperature sensor failure/fault.
Not economizing when it should.
Economizing when it should not.
Damper not modulating.
Excess outdoor air.
Supply temperature out of range.
Dry-Contact input to notification.

| Technical Specifications

COMPATIBILITY

Compatible with both the Pelican TC and TS series thermostats.

MOUNTING

Designed to be mounted inside the HVAC equipment it is controlling.

DIMENSIONS

in: 3.6 X 5.2 X 1.1
mm: 91.4 X 142 X 28

POWER

24 VAC, 60 Hz, 105mA

OPERATING VOLTAGE RANGE

23 - 30 VAC

RELAY CURRENT RATING

2.0A running (E)

Reference TC or TS Series thermostat technical specification for information on Limited Wiring Module relay ratings.

CODE COMPLIANCY

Meets California Title 24 Code.
Follows ASHREA Economizer and Ventilation standards.

OPERATING RANGE

-4°F to 122°F
5% to 90 % Relative Humidity (non-condensing)

STORAGE

-20°F to 160°F

OUTPUTS

A1: 0-10; VDC; adjustable range.
A2: 0-10VDC; adjustable range
E: 24 VAC (Enables during economizer and demand ventilation cycles).

INPUTS

S1: 0-10 VDC feedback; for outside damper fault detection.
S2: 0-10VDC feedback; for future use.
T1: 10K Type II Temperature Sensor Input or Dry-Contact Input
T2: 10K Type II Temperature Sensor Input or Dry-Contact Input
T3: 10K Type II Temperature Sensor Input or Dry-Contact Input

ADD TA1

A single Pelican thermostat, TC or TS Series, can accept a PEARL and a TA1.

SYSTEM PROTECTIONS

Mixed air low limit safety.
Free cooling enable/available indication.
Economizer enabled indication.
Compressor enabled indication.
Heating enabled indication.
Temperature sensor readings.
Minimum outside damper setting.
Maximum outside damper setting.
Outside Compressor Lock-Out
Temper Low Ambient Air

ALERTS AND NOTIFICATIONS

Air temperature sensor failure/fault.
Not economizing when it should.
Economizing when it should not.
Damper not modulating.
Excess outdoor air.
Supply temperature out of range.
Dry-Contact input to notification.

PELICANIMPACTSOTHERS

With hundreds of thousands of customers using Pelican, we want you to hear some of their stories.

LEARN MORE

DISCOVERMOREPELICAN

LEARN MORE

DISCOVERMOREPELICAN

HEAR THEIR STORIES

PELICANIMPACTSOTHERS

With hundreds of thousands of customers using Pelican, we want you to hear some of their stories.

HEAR THEIR STORIES

PELICANIMPACTSOTHERS

With hundreds of thousands of customers using Pelican, we want you to hear some of their stories.